Loading the page
69100 subscribers
Subscribe on YouTube!
Below is a listing of the most common errors and some suggestions for solving the problems.
0% fan speeds / fan errors in general
- The fans aren't really spinning
- GPU RPM sensor is disconnected
- GPU overclocking is too aggressive (usually the case)
AMD settings applied with errors
- Check the OC of the gpu that is giving the error
- Defective or poorly fitted riser USB cable
- Check the integrity of the riser
Autofan: unable to set fan speed, rebooting
- Make a test, setting the FAN at 100% directly on the Overclock tab and lower your OC a little, if the problem doesn't occur, the gpu is overheating
- Change the riser slot on the motherboard to see if the problem goes away
Error: connection to api server failed
- Use the net-test command to test your connection
- Try to ping "ping 8.8.8.8" (Google server), if not responding, network problem (No connection)
- Try to ping the Hive server The hiveos.farm to verify that the Hive server is accessible
File-System is read-only
- Reboot the system, if it continues, redo the boot disk. If the error persists, change the pendrive/hd/ssd.
GPU dead / GPU HUNG
- AMD: Gradually increase gpu Core Voltage
- Nvidia: increase the board's PL a little if you are limiting the gpu energy with the PL
- Nvidia: Check Core Clock OC
GPU driver errors, no temps
A very common problem to occur that can be caused by:
- Defective or poorly fitted riser USB cable
- Video card poorly seated on the front (it raises in front of the slot making poor contact)
- Check your GPU / Riser / Power Cable connections
GPU has fallen off the bus
- Check gpu power
- Check if the power supply cables are intact, if none are brittle, with a bent terminal
- Size the power supply energy correctly
GPU temperature 511 is unreal, driver error
A very common problem to occur that can be caused by:
- Check the overclocking of the GPU(s) that have the error
- Defective or poorly fitted riser USB cable
- Video card poorly seated on the front (it raises in front of the slot making poor contact)
- Check your GPU / Riser / Power Cable connections
Nvidia settings applied with errors
- Check the OC of the gpus if they are with acceptable values for the gpu model
- Change the miner to test, if it works, try to go back to the error miner and use a different version than the current one
nvml can get gpu …… error code 15
- Try to reduce the card's Core Clock and if the card is being limited via PL, reduce a little the card's PL
- Check if the power supply cables are intact, if none are brittle, with a bent terminal
[drm:amdgpu_ib_ring_tests] *ERROR* amdgpu
If you get messages like this when starting your Hive OS, check your riser (the part that fits on the motherboard).
A riser malfunction causes this message.
[drm:amdgpu_ib_ring_tests] *ERROR* amdgpu: failed testing IB on ring 1 (-110)
[drm:amdgpu_vce_ring_test_ib] *ERROR* amdgpu: IB test timed out.
If you find any error or invalid information, contact me!
Discord: https://www.julianocaju.com.br/discord
Telegram: https://t.me/julianocaju